View T541D157M10AH6510_9117400.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 1 benefts ? a pproved for dla drawing 04051/04052 ? b , c and d failure rates available ? 1 00% accelerated steady state aging ? h igh frequency capacitance retention ? o ptional improved humidity capability (in black color epoxy) ? very low esr values down to 5 m ? s urge current testing options ? volumetrically effcient ? e ia standard case sizes ? k emet's ko-cap reliability assessment method overview the kemet organic capacitor (ko-cap) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low esr and improved capacitance retention at high frequencies. ko-cap combines the low esr of multilayer ceramic, the high capacitance of aluminum electrolytic and the volumetric effciency of tantalum into a single surface mount package. u nlike liquid electrolyte-based capacitors, ko-cap has a very long operational life and high ripple current capabilities. the cots polymer electrolytic offers the same performance advantages as other ko-cap series with screening options associated with high reliability ("hi- rel") applications. these commerical-off-the-shelf (cots) grade components offer several surge current screening options. the recommended application derating for these capacitors is 10 C 20%, rendering them suitable for application voltages from 2.5 to 63 vdc. these series are the frst polymer electrolytic capacitor a vailable with failure rate options as defned by kemet's k o-cap reliability assessment method. this method utilizes accelerated conditions (voltage and temperature) applied to board-mounted samples to assess long term device reliability. the failure rates available are b (0.1% per 1,000 hours), c (0.01% per 1,000 hours) and d (0.001% per 1,000 hours). the ko-cap reliability assessment method was developed as a result of over 10 years of research and is described in numerous papers available on www.kemet.com. kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc note: black epoxy parts for surge options 85, 86 and 87 one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 2 2 applications typical applications include decoupling , fltering and hold-up in defense and aerospace applications that require low esr or a b enign failure mode. when extreme temperatures and humidity are taken into account, polymer capacitors offer a number of advantages over other types of capacitors.kemet continues to investigate the behavior of polymer capacitors in extreme conditions .if you have questions about using these capacitors in a specifc environment or application, we suggest you contact your l ocal kemet representative or field application engineer. you may also refer to considerations for polymer capacitors in extreme environments located at www.kemet.com/extremepolymerpaper . environmental compliance rohs compliant (6/6) according to directive 2002/95/ec when ordered with 100% sn solder. halogen free. k-sim for a detailed analysis of specifc part numbers, please visit ksim.kemet.com to access kemet's k-sim software. kemet k -sim is designed to simulate behavior of components with respect to frequency, ambient temperature, and dc bias levels. ordering information t 541 d 157 m 10 a h 65 10 capacitor class series case size capacitance code (pf) capacitance tolerance rated voltage (vdc) failure rate/ design termination finish surge option esr packaging (c-spec) t = tantalum 540 = polymer cots 541 = polymer cots multiple anode b, c, d, x, y first two digits represent signifcant f gures. third d igit specifes n umber of zeros. k = 10% m = 20% 2r5 = 2.5 003 = 3 004 = 4 006 = 6.3 010 = 10 016 = 16 020= 20 025 = 25 035 = 35 050 = 50 063 = 63 a = n/a b* = 0.1%/khrs c* = 0.01%/khrs d*= 0.001%/khrs h = standard solder coated (snpb 5% pb minimum) t = 100% matte tin (sn) plated 65 = 4 cycles at 25c 5c** 66 = 10 cycles at 25c 5c*** 67 = 10 cycles at -55c +0c/-5c and +85c 5c*** 85 = 4 cycles at 25c 5c ** and improved humidity capability 86 = 10 cycles at 25c 5c*** and improved humidity capability 87= 10 cycles at ?55c +0c/?5c a nd +85c 5c*** and improved humidity capability 05 = esr - high 10 = esr - standard 20 = esr - low 30* = esr - ultra low esr blank = 7" reel 7280 = 13" reel 7610 = bulk bag 7640 = bluk plastic box wafl = waffe pack * select part numbers, ** before voltage aging, *** after voltage aging kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 3 3 ordering information C dla drawing 04052- 002 a drawing number dash number surge current option 04052 04051 see part number list blank = 4 cycles +25c 5c before voltage aging a = 10 cycles +25c 5c after voltage aging b = 10 cycles ?55c + 0c/?5c and +85c 5c a fter voltage aging performance characteristics item performance characteristics operating temperature ?55c to 125c * rated capacitance range 4.7 C 1,500 f at 120 hz/25c capacitance tolerance k tolerance (10%), m tolerance (20%) rated voltage range 2.5 C 63 v df (120 hz) 10% e sr (100 khz) refer to part number electrical specifcation table l eakage current 0.1c v (a) at rated voltage after 5 minutes * kemets polymer cots (t540/t541 series) capacitors are rated for operation between ?55c and +125c. parametric electrical performance remains within stated specifcation limits after 1,000 hours of continuous operation and/or storage at +125c. long-term duty cycles or storage at or above +125c may result in an increase in esr performance outside of the stated specifcation limits. kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 4 4 qualifcation test condition characteristics endurance 105c at rated voltage, 2,000 hours 125c at 2/3 rated voltage, 2,000 hours c/c within ?20/+10% of initial value df initial limit dcl ** 1.25 x il at 125oc esr 2 x il (105oc); 5 x il (125oc) storage life 125c at 0 volts, 2,000 hours c/c within ?20/+10% of initial value df within initial limits dcl ** within 2.0 x initial limit esr within 5.0 x initial limit humidity 60c, 90% rh, 500 hours, rated voltage 60c, 90% rh, 500 hours, no load 85c, 85% rh, 1,000 hours, rated voltage *** c/c within ?5%/+35% of initial value df initial limit within 1.5 x initial limit *** dcl within 3.0 x initial limit temperature stability extreme temperature exposure at a succession of continuous steps at +25c, ?55c, +25c, +85c, +125c, +25c +25c ?55c +85c (1) +125c (2) c/c 5% 10% 20% 30% df il il 1.2 x il 1.5 x il dcl il n/a 10 x il 10 x il surge voltage 105c, 1.32 x rated voltage, 33 resistance, 1,000 cycles c/c within ?20/+5% of initial value df within initial limits dcl within initial limits esr within initial limits mechanical shock/ vibration mil-std-202, method 213, condition i, 100 g peak mil-std-202, method 204, condition d, 10 hz to 2,000 hz, 20 g peak c/c within 10% of initial value df within initial limits dcl within initial limits additional qualifcation testing per mil-prf-55365/8 please contact kemet for more information *il = initial limit ** the test voltage shall be maintained during the cool down from elevated test temperature to +25c. after cool down, the capacitors shall be discharged for a minimum of 5 minutes. dc leakage measurements are allowed at this time. (1) 16v - d c/c = 30% (2) 16v - d c/c = 40% *** for part number with surge options 85, 86 and 87 certifcation dla drawing 04051 & 04052 kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 5 5 electrical characteristics capacitance vs. frequency esr vs. frequency 0.001 0.01 0.1 1 10 100 100 1,000 10,000 100,000 1,000,000 10,000,00 0 impedance, esr (ohms) frequency (hz) t541d227m010ahe010_imp t541x337m010ahe010_imp t541x157m016ahe025_imp t541d227m010ahe010_esr t541x337m010ahe010_esr t541x157m016ahe025_esr 1 10 100 1,000 100 1,000 10,000 100,000 1,000,000 10,000,000 capacitance (f) frequency (hz) t541d227m010ahe010_cap t541x337m010ahe010_cap t541x157m016ah025_cap dimensions C millimeters (inches) metric will govern h x t b b g f e a l r p side view anode (+) end view bottom view cathode (-) end view w s s termination cutout at kemet's option, either end case size component dimensions total weight kemet eia l w h f0.1 (0.004) s0.3 (0.012) b0.15 (ref)0.006 x (ref) p (ref) r (ref) t (ref) a (minimum) g (ref) e (ref) (mg) b 3528-21 3.50.2 (0.1380.008) 2.80.2 (0.1100.008) 1.90.2 (0.0750.004) 2.2 (0.087) 0.8 (0.031) 0.4 (0.016) 0.100.10 (0.0040.004) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.9 (0.075) 1.8 (0.071) 2.2 (0.087) 98.30 c 6032-28 6.00.3 (0.2360.012) 3.20.3 (0.1260.012) 2.50.3 (0.0980.012) 2.2 (0.087) 1.3 (0.051) 0.5 (0.020) 0.100.10 (0.0040.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.1 (0.122) 2.8 (0.110) 2.4 (0.095) 193.46 d 7343-31 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 2.80.3 (0.1100.012) 2.4 (0.095) 1.3 (0.051) 0.5 (0.020) 0.100.10 (0.0040.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 307.51 x 7343-43 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 4.00.3 (0.1570.012) 2.4 (0.095) 1.3 (0.051) 0.5 (0.020) 0.100.10 (0.0040.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 410.89 y 7343-40 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 3.80.2 (0.150 0.008) 2.4 (0.095) 1.3 (0.051) 0.5 (0.020) 0.100.10 (0.0040.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 378.06 notes: (ref) C dimensions provided for reference only. these weights are provided as reference. if exact weights are needed, please contact your kemet sales representative kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 6 6 table 1 C ratings & part number reference (1) to complete kemet part number, insert 65 = 4 cycles +25c, 66 = 10 cycles +25c, 67 = 10 cycles ? 55c and +85c, designates surge current option. (2) to complete dla part number, insert blank = none, a = 10 cycles +25c 5c after voltage aging, b = 10 cycles ? 55c and +85c 5c after voltage aging. (3) to complete kemet part number for non-dla, insert a = n/a ,insert b = 0.1%/1,000 hours, c = 0.01%/1,000 hours, d=0.001%/1,000 hours. designates reliability level. (4) to complete kemet part number for non-dla, insert a = n/a, insert b = 0.1%/1,000 hours or c = 0.01%/1,000 hours. designates reliability level. (5) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (6) to complete kemet part number insert, h = solder plated, t = 100% tin (sn). designates termination fnish. (7) to complete kemet part number, insert 85 = 4 cycles at 25c 5c ** + improved humidity capability, 86 = 10 cycles at 25c 5c*** + improved humidity capability, 87= 10 cycles at ? 55c +0c/ ? 5c and +85c 5c*** + improved humidity capability. designates surge current option on improved humidity capability. rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051/04052 dc leakage df esr maximum allowable ripple current maximum operating temp vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum ma at 45c 100 khz c 2.5 330 d/7343-31 t540d337m2r5ah(1)10 04051-002(2) 83 10 25 3000 125 2.5 330 d/7343-31 t540d337(5)2r5(3)(6)(1)10 n/a 83 10 25 3000 125 2.5 330 d/7343-31 t540d337(5)2r5(3)h(7)05 n/a 83 10 40 2372 125 2.5 470 d/7343-31 t540d477m2r5ah(1)10 04051-003(2) 118 10 25 3000 125 2.5 470 d/7343-31 t540d477(5)2r5(3)(6)(1)10 n/a 118 10 25 3000 125 2.5 470 d/7343-31 t540d477(5)2r5(3)h(7)05 n/a 118 10 40 2372 125 2.5 470 d/7343-31 t541d477m2r5ah(1)20 04052-002(2) 118 10 6 6519 125 2.5 470 d/7343-31 t541d477(5)2r5(3)(6)(1)20 n/a 118 10 6 6519 125 2.5 470 d/7343-31 t541d477m2r5ah(1)10 04052-003(2) 118 10 10 5050 125 2.5 470 d/7343-31 t541d477(5)2r5(3)(6)(1)10 n/a 118 10 10 5050 125 2.5 680 d/7343-31 t540d687m2r5ah(1)10 04051-004(2) 170 10 25 3000 125 2.5 680 d/7343-31 t540d687(5)2r5(3)(6)(1)10 n/a 170 10 25 3000 125 2.5 680 d/7343-31 t540d687(5)2r5(3)h(7)05 n/a 170 10 40 2372 125 2.5 680 d/7343-31 t541d687m2r5ah(1)20 04052-007(2) 170 10 6 6519 125 2.5 680 d/7343-31 t541d687(5)2r5(3)(6)(1)20 n/a 170 10 6 6519 125 2.5 680 d/7343-31 t541d687m2r5ah(1)10 04052-008(2) 170 10 10 5050 125 2.5 680 d/7343-31 t541d687(5)2r5(3)(6)(1)10 n/a 170 10 10 5050 125 2.5 680 y/7343-40 t541y687m2r5ah(1)30 04052-005(2) 170 10 5 7253 125 2.5 680 y/7343-40 t541y687(5)2r5(3)(6)(1)30 n/a 170 10 5 7253 125 2.5 680 y/7343-40 t541y687m2r5ah(1)20 04052-006(2) 170 10 6 6621 125 2.5 680 y/7343-40 t541y687(5)2r5(3)(6)(1)20 n/a 170 10 6 6621 125 2.5 680 y/7343-40 t541y687m2r5ah(1)10 04052-042(2) 170 10 10 5128 125 2.5 680 y/7343-40 t541y687(5)2r5(3)(6)(1)10 n/a 170 10 10 5128 125 2.5 1000 x/7343-43 t541x108m2r5ah(1)30 04052-009(2) 250 10 5 7348 125 2.5 1000 x/7343-43 t541x108(5)2r5(3)(6)(1)30 n/a 250 10 5 7348 125 2.5 1000 x/7343-43 t541x108m2r5ah(1)20 04052-010(2) 250 10 6 6708 125 2.5 1000 x/7343-43 t541x108(5)2r5(3)(6)(1)20 n/a 250 10 6 6708 125 2.5 1000 x/7343-43 t541x108m2r5ah(1)10 04052-043(1) 250 10 10 5196 125 2.5 1000 x/7343-43 t541x108(5)2r5(3)(6)(1)10 n/a 250 10 10 5196 125 2.5 1500 x/7343-43 t541x158m2r5ah(1)30 04052-011(2) 375 10 5 7348 125 2.5 1500 x/7343-43 t541x158(5)2r5(3)(6)(1)30 n/a 375 10 5 7348 125 2.5 1500 x/7343-43 t541x158m2r5ah(1)20 04052-044(2) 375 10 6 6708 125 2.5 1500 x/7343-43 t541x158(5)2r5(3)(6)(1)20 n/a 375 10 6 6708 125 2.5 1500 x/7343-43 t541x158m2r5ah(1)10 04052-045(2) 375 10 10 5196 125 2.5 1500 x/7343-43 t541x158(5)2r5(3)(6)(1)10 n/a 375 10 10 5196 125 3 100 b/3528-21 t540b107m003ah(1)10 04051-005(2) 30 8 80 1260 125 3 1 00 b/3528-21 t540b107(5)003(3)(6)(1)10 n/a 30 8 80 1260 125 3 100 b/3528-21 t540b107(5)003(3)h(7)10 n/a 30 8 80 1260 125 3 150 b/3528-21 t540b157m003ah(1)10 04051-006(2) 45 8 80 1260 125 3 150 b/3528-21 t540b157(5)003(3)(6)(1)10 n/a 45 8 80 1260 125 3 150 b/3528-21 t540b157(5)003(3)h(7)10 n/a 45 8 80 1260 125 3 330 d/7343-31 t540d337m003ah(1)10 04051-007(2) 99 10 25 3000 125 3 330 d/7343-31 t540d337(5)003(3)(6)(1)10 n/a 99 10 25 3000 125 3 330 d/7343-31 t540d337(5)003(3)h(7)05 n/a 99 10 40 2372 125 3 470 d/7343-31 t540d477m003ah(1)10 04051-008(2) 141 10 25 3000 125 3 470 d/7343-31 t540d477(5)003(3)(6)(1)10 n/a 141 10 25 3000 125 3 470 d/7343-31 t540d477(5)003(3)h(7)05 n/a 141 10 40 2372 125 3 470 d/7343-31 t541d477m003ah(1)10 04052-012(2) 141 10 10 5050 125 3 470 d/7343-31 t541d477(5)003(3)(6)(1)10 n/a 141 10 10 5050 125 3 680 d/7343-31 t540d687m003ah(1)10 04051-009(2) 204 10 25 3000 125 vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum w/t = 20c at ?55c to 105c c rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051 dc leakage df esr maximum allowable ripple current (a) 100 khz maximum operating temp kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 7 7 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert 65 = 4 cycles +25c, 66 = 10 cycles +25c, 67 = 10 cycles ? 55c and +85c, designates surge current option. (2) to complete dla part number, insert blank = none, a = 10 cycles +25c 5c after voltage aging, b = 10 cycles ? 55c and +85c 5c after voltage aging. (3) to complete kemet part number for non-dla, insert a = n/a ,insert b = 0.1%/1,000 hours, c = 0.01%/1,000 hours, d=0.001%/1,000 hours. designates reliability level. (4) to complete kemet part number for non-dla, insert a = n/a, insert b = 0.1%/1,000 hours or c = 0.01%/1,000 hours. designates reliability level. (5) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (6) to complete kemet part number insert, h = solder plated, t = 100% tin (sn). designates termination fnish. (7) to complete kemet part number, insert 85 = 4 cycles at 25c 5c ** + improved humidity capability, 86 = 10 cycles at 25c 5c*** + improved humidity capability, 87= 10 cycles at ? 55c +0c/ ? 5c and +85c 5c*** + improved humidity capability. designates surge current option on improved humidity capability. rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051/04052 dc leakage df esr maximum allowable ripple current maximum operating temp vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum ma at 45c 100 khz c 3 680 d/7343-31 t540d687(5)003(3)(6)(1)10 n/a 204 10 25 3000 125 3 680 d/7343-31 t540d687(5)003(3)h(7)05 n/a 204 10 40 2372 125 3 680 d/7343-31 t541d687m003ah(1)10 04052-013(2) 204 10 10 5050 125 3 680 d/7343-31 t541d687(5)003(3)(6)(1)10 n/a 204 10 10 5050 125 3 1000 x/7343-43 t541x108m003ah(1)10 04052-014(2) 300 10 10 5196 125 3 1000 x/7343-43 t541x108(5)003(3)(6)(1)10 n/a 300 10 10 5196 125 3 1500 x/7343-43 t541x158m003ah(1)10 04052-015(2) 450 10 8 5809 125 3 1500 x/7343-43 t541x158(5)003(3)(6)(1)10 n/a 450 10 8 5809 125 4 68 b/3528-21 t540b686m004ah(1)10 04051-011(2) 28 8 80 1260 125 4 68 b/3528-21 t540b686(5)004(3)(6)(1)10 n/a 28 8 80 1260 125 4 68 b/3528-21 t540b686(5)004(3)h(7)10 n/a 28 8 80 1260 125 4 100 b/3528-21 t540b107m004ah(1)10 04051-012(2) 40 8 80 1260 125 4 100 b/3528-21 t540b107(5)004(3)(6)(1)10 n/a 40 8 80 1260 125 4 100 b/3528-21 t540b107(5)004(3)h(7)10 n/a 40 8 80 1260 125 4 220 d/7343-31 t540d227m004ah(1)10 04051-013(2) 88 10 25 3000 125 4 220 d/7343-31 t540d227(5)004(3)(6)(1)10 n/a 88 10 25 3000 125 4 220 d/7343-31 t540d227(5)004(3)h(7)05 n/a 88 10 40 2372 125 4 330 d/7343-31 t540d337m004ah(1)10 04051-014(2) 132 10 25 3000 125 4 330 d/7343-31 t540d337(5)004(3)(6)(1)10 n/a 132 10 25 3000 125 4 330 d/7343-31 t540d337(5)004(3)h(7)05 n/a 132 10 40 2372 125 4 330 d/7343-31 t541d337m004ah(1)20 04052-017(2) 132 10 6 6519 125 4 330 d/7343-31 t541d337(5)004(3)(6)(1)20 n/a 132 10 6 6519 125 4 330 d/7343-31 t541d337m004ah(1)10 04052-046(2) 132 10 10 5050 125 4 330 d/7343-31 t541d337(5)004(3)(6)(1)10 n/a 132 10 10 5050 125 4 470 d/7343-31 t540d477m004ah(1)20 04051-015(2) 188 10 25 3000 125 4 470 d/7343-31 t540d477(5)004(3)(6)(1)20 n/a 188 10 25 3000 125 4 470 d/7343-31 t540d477m004ah(1)10 04051-016(2) 188 10 40 2372 125 4 470 d/7343-31 t540d477(5)004(3)(6)(1)10 n/a 188 10 40 2372 125 4 470 d/7343-31 t540d477(5)004(3)h(7)10 n/a 188 10 40 2372 125 4 470 d/7343-31 t541d477m004ah(1)10 04052-018(2) 188 10 10 5050 125 4 470 d/7343-31 t541d477(5)004(3)(6)(1)10 n/a 188 10 10 5050 125 4 470 y/7343-40 t541y477m004ah(1)30 04052-019(2) 188 10 5 7253 125 4 470 y/7343-40 t541y477(5)004(3)(6)(1)30 n/a 188 10 5 7253 125 4 470 y/7343-40 t541y477m004ah(1)20 04052-020(2) 188 10 6 6621 125 4 470 y/7343-40 t541y477(5)004(3)(6)(1)20 n/a 188 10 6 6621 125 4 470 y/7343-40 t541y477m004ah(1)10 04052-047(2) 188 10 10 5128 125 4 4 70 y/7343-40 t541y477(5)004(3)(6)(1)10 n/a 188 10 10 5128 125 4 680 x/7343-43 t541x687m004ah(1)30 04052-021(2) 272 10 5 7348 125 4 680 x/7343-43 t541x687(5)004(3)(6)(1)30 n/a 272 10 5 7348 125 4 680 x/7343-43 t541x687m004ah(1)20 04052-022(2) 272 10 6 6708 125 4 680 x/7343-43 t541x687(5)004(3)(6)(1)20 n/a 272 10 6 6708 125 4 680 x/7343-43 t541x687m004ah(1)10 04052-023(2) 272 10 10 5196 125 4 680 x/7343-43 t541x687(5)004(3)(6)(1)10 n/a 272 10 10 5196 125 4 1000 x/7343-43 t541x108m004ah(1)20 04052-024(2) 400 10 6 6708 125 4 1000 x/7343-43 t541x108(5)004(3)(6)(1)20 n/a 400 10 6 6708 125 4 1000 x/7343-43 t541x108m004ah(1)10 04052-048(2) 400 10 10 5196 125 4 1000 x/7343-43 t541x108(5)004(3)(6)(1)10 n/a 400 10 10 5196 125 6.3 33 b/3528-21 t540b336m006ah(1)10 04051-017(2) 21 8 80 1260 125 6.3 33 b/3528-21 t540b336(5)006(3)(6)(1)10 n/a 21 8 80 1260 125 6.3 33 b/3528-21 t540b336(5)006(3)h(7)10 n/a 21 8 80 1260 125 vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum w/t = 20c at ?55c to 105c c rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051 dc leakage df esr maximum allowable ripple current (a) 100 khz maximum operating temp kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 8 8 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert 65 = 4 cycles +25c, 66 = 10 cycles +25c, 67 = 10 cycles ? 55c and +85c, designates surge current option. (2) to complete dla part number, insert blank = none, a = 10 cycles +25c 5c after voltage aging, b = 10 cycles ? 55c and +85c 5c after voltage aging. (3) to complete kemet part number for non-dla, insert a = n/a ,insert b = 0.1%/1,000 hours, c = 0.01%/1,000 hours, d=0.001%/1,000 hours. designates reliability level. (4) to complete kemet part number for non-dla, insert a = n/a, insert b = 0.1%/1,000 hours or c = 0.01%/1,000 hours. designates reliability level. (5) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (6) to complete kemet part number insert, h = solder plated, t = 100% tin (sn). designates termination fnish. (7) to complete kemet part number, insert 85 = 4 cycles at 25c 5c ** + improved humidity capability, 86 = 10 cycles at 25c 5c*** + improved humidity capability, 87= 10 cycles at ? 55c +0c/ ? 5c and +85c 5c*** + improved humidity capability. designates surge current option on improved humidity capability. rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051/04052 dc leakage df esr maximum allowable ripple current maximum operating temp vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum ma at 45c 100 khz c 6.3 47 b/3528-21 t540b476m006ah(1)10 04051-019(2) 30 8 80 1260 125 6.3 47 b/3528-21 t540b476(5)006(3)(6)(1)10 n/a 30 8 80 1260 125 6.3 47 b/3528-21 t540b476(5)006(3)h(7)10 n/a 30 8 80 1260 125 6.3 68 b/3528-21 t540b686m006ah(1)10 04051-020(2) 43 8 80 1260 125 6.3 68 b/3528-21 t540b686(5)006(3)(6)(1)10 n/a 43 8 80 1260 125 6.3 68 b/3528-21 t540b686(5)006(3)h(7)10 n/a 43 8 80 1260 125 6.3 150 d/7343-31 t540d157m006ah(1)10 04051-021(2) 95 10 25 3000 125 6.3 150 d/7343-31 t540d157(5)006(3)(6)(1)10 n/a 95 10 25 3000 125 6.3 150 d/7343-31 t540d157(5)006(3)h(7)05 n/a 95 10 40 2372 125 6.3 220 d/7343-31 t540d227m006ah(1)10 04051-022(2) 139 10 25 3000 125 6.3 220 d/7343-31 t540d227(5)006(3)(6)(1)10 n/a 139 10 25 3000 125 6.3 220 d/7343-31 t540d227(5)006(3)h(7)05 n/a 139 10 40 2372 125 6.3 220 d/7343-31 t541d227m006ah(1)20 04052-026(2) 139 10 6 6519 125 6.3 220 d/7343-31 t541d227(5)006(3)(6)(1)20 n/a 139 10 6 6519 125 6.3 220 d/7343-31 t541d227m006ah(1)10 04052-049(2) 139 10 10 5050 125 6.3 220 d/7343-31 t541d227(5)006(3)(6)(1)10 n/a 139 10 10 5050 125 6.3 330 d/7343-31 t540d337m006ah(1)20 04051-023(2) 208 10 25 3000 125 6.3 330 d/7343-31 t540d337(5)006(3)(6)(1)20 n/a 208 10 25 3000 125 6.3 330 d/7343-31 t540d337m006ah(1)10 04051-024(2) 208 10 40 2372 125 6.3 330 d/7343-31 t540d337(5)006(3)(6)(1)10 n/a 208 10 40 2372 125 6.3 330 d/7343-31 t540d337(5)006(3)h(7)10 n/a 208 10 40 2372 125 6.3 330 d/7343-31 t541d337m006ah(1)10 04052-027(2) 208 10 10 5050 125 6.3 330 d/7343-31 t541d337(5)006(3)(6)(1)10 n/a 208 10 10 5050 125 6.3 330 y/7343-40 t541y337m006ah(1)30 04052-028(2) 208 10 5 7253 125 6.3 330 y/7343-40 t541y337(5)006(3)(6)(1)30 n/a 208 10 5 7253 125 6.3 330 y/7343-40 t541y337m006ah(1)20 04052-029(2) 208 10 6 6621 125 6.3 330 y/7343-40 t541y337(5)006(3)(6)(1)20 n/a 208 10 6 6621 125 6.3 330 y/7343-40 t541y337m006ah(1)10 04052-030(2) 208 10 10 5128 125 6.3 330 y/7343-40 t541y337(5)006(3)(6)(1)10 n/a 208 10 10 5128 125 6.3 470 x/7343-43 t541x477m006ah(1)30 04052-031(2) 296 10 5 7348 125 6.3 470 x/7343-43 t541x477(5)006(3)(6)(1)30 n/a 296 10 5 7348 125 6.3 470 x/7343-43 t541x477m006ah(1)20 04052-032(2) 296 10 6 6708 125 6.3 470 x/7343-43 t541x477(5)006(3)(6)(1)20 n/a 296 10 6 6708 125 6.3 470 x/7343-43 t541x477m006ah(1)10 04052-033(2) 296 10 10 5196 125 6.3 470 x/7343-43 t541x477(5)006(3)(6)(1)10 n/a 296 10 10 5196 125 6.3 680 x/7343-43 t541x687(5)006a(6)(1)10 n/a 428 10 15 4243 125 1 0 22 b/3528-21 t540b226m010ah(1)10 04051-025(2) 22 8 80 1260 125 10 22 b/3528-21 t540b226(5)010(3)(6)(1)10 n/a 22 8 80 1260 125 10 22 b/3528-21 t540b226(5)010(3)h(7)10 n/a 22 8 80 1260 125 10 33 b/3528-21 t540b336m010ah(1)10 04051-027(2) 33 8 80 1260 125 10 33 b/3528-21 t540b336(5)010(3)(6)(1)10 n/a 33 8 80 1260 125 10 33 b/3528-21 t540b336(5)010(3)h(7)10 n/a 33 8 80 1260 125 10 100 d/7343-31 t540d107m010ah(1)20 04051-028(2) 100 10 25 3000 125 10 100 d/7343-31 t540d107(5)010(3)(6)(1)20 n/a 100 10 25 3000 125 10 100 d/7343-31 t540d107m010ah(1)10 04051-029(2) 100 10 55 2023 125 10 100 d/7343-31 t540d107(5)010(3)(6)(1)10 n/a 100 10 55 2023 125 10 150 d/7343-31 t540d157m010ah(1)20 04051-030(2) 150 10 25 3000 125 10 150 d/7343-31 t540d157(5)010(3)(6)(1)20 n/a 150 10 25 3000 125 10 150 d/7343-31 t540d157m010ah(1)10 04051-031(2) 150 10 55 2023 125 10 150 d/7343-31 t540d157(5)010(3)(6)(1)10 n/a 150 10 55 2023 125 vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum w/t = 20c at ?55c to 105c c rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051 dc leakage df esr maximum allowable ripple current (a) 100 khz maximum operating temp kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 9 9 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert 65 = 4 cycles +25c, 66 = 10 cycles +25c, 67 = 10 cycles ? 55c and +85c, designates surge current option. (2) to complete dla part number, insert blank = none, a = 10 cycles +25c 5c after voltage aging, b = 10 cycles ? 55c and +85c 5c after voltage aging. (3) to complete kemet part number for non-dla, insert a = n/a ,insert b = 0.1%/1,000 hours, c = 0.01%/1,000 hours, d=0.001%/1,000 hours. designates reliability level. (4) to complete kemet part number for non-dla, insert a = n/a, insert b = 0.1%/1,000 hours or c = 0.01%/1,000 hours. designates reliability level. (5) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (6) to complete kemet part number insert, h = solder plated, t = 100% tin (sn). designates termination fnish. (7) to complete kemet part number, insert 85 = 4 cycles at 25c 5c ** + improved humidity capability, 86 = 10 cycles at 25c 5c*** + improved humidity capability, 87= 10 cycles at ? 55c +0c/ ? 5c and +85c 5c*** + improved humidity capability. designates surge current option on improved humidity capability. rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051/04052 dc leakage df esr maximum allowable ripple current maximum operating temp vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum ma at 45c 100 khz c 10 150 d/7343-31 t541d157m010ah(1)20 04052-035(2) 150 10 6 6519 125 10 150 d/7343-31 t541d157(5)010(3)(6)(1)20 n/a 150 10 6 6519 125 10 150 d/7343-31 t541d157m010ah(1)10 04052-050(2) 150 10 10 5050 125 10 150 d/7343-31 t541d157(5)010(3)(6)(1)10 n/a 150 10 10 5050 125 10 220 d/7343-31 t540d227m010ah(1)10 04051-032(2) 220 10 25 3000 125 10 220 d/7343-31 t540d227(5)010(3)(6)(1)10 n/a 220 10 25 3000 125 10 220 d/7343-31 t541d227m010ah(1)20 04052-036(2) 220 10 6 6519 125 10 220 d/7343-31 t541d227(5)010(3)(6)(1)20 n/a 220 10 6 6519 125 10 220 d/7343-31 t541d227m010ah(1)10 04052-037(2) 220 10 10 5050 125 10 220 d/7343-31 t541d227(5)010(3)(6)(1)10 n/a 220 10 10 5050 125 10 220 y/7343-40 t541y227m010ah(1)20 04052-038(2) 220 10 6 6621 125 10 220 y/7343-40 t541y227(5)010(3)(6)(1)20 n/a 220 10 6 6621 125 10 220 y/7343-40 t541y227m010ah(1)10 04052-051(2) 220 10 10 5128 125 10 220 y/7343-40 t541y227(5)010(3)(6)(1)10 n/a 220 10 10 5128 125 10 330 x/7343-43 t541x337m010ah(1)30 04052-039(2) 330 10 5 7348 125 10 330 x/7343-43 t541x337(5)010(3)(6)(1)30 n/a 330 10 5 7348 125 10 330 x/7343-43 t541x337m010ah(1)20 04052-040(2) 330 10 6 6708 125 10 330 x/7343-43 t541x337(5)010(3)(6)(1)20 n/a 330 10 6 6708 125 10 330 x/7343-43 t541x337m010ah(1)10 04052-041(2) 330 10 10 5196 125 10 330 x/7343-43 t541x337(5)010(3)(6)(1)10 n/a 330 10 10 5196 125 10 470 x/7343-43 t541x477(5)010(3)(6)(1)10 n/a 470 10 20 3674 125 16 47 d/7343-31 t540d476m016ah(1)20 04051-033(2) 76 10 35 2535 125 16 47 d/7343-31 t540d476(5)016(3)(6)(1)20 n/a 76 10 35 2535 125 16 47 d/7343-31 t540d476m016ah(1)10 04051-034(2) 76 10 65 1861 125 16 47 d/7343-31 t540d476(5)016(3)(6)(1)10 n/a 76 10 65 1861 125 16 68 d/7343-31 t540d686m016ah(1)10 04051-035(2) 109 10 75 1732 125 16 68 d/7343-31 t540d686(5)016(3)(6)(1)10 n/a 109 10 75 1732 125 16 100 d/7343-31 t540d107m016ah(1)10 04051-036(2) 160 10 50 2121 125 16 100 d/7343-31 t540d107(5)016(3)(6)(1)10 n/a 160 10 50 2121 125 16 150 x/7343-43 t541x157m016ah(1)20 04052-052(2) 240 10 25 3286 125 16 150 x/7343-43 t541x157(5)016(3)(6)(1)20 n/a 240 10 25 3286 125 16 150 x/7343-43 t541x157m016ah(1)10 04052-053(2) 240 10 40 2598 125 16 150 x/7343-43 t541x157(5)016(3)(6)(1)10 n/a 240 10 40 2598 125 16 220 x/7343-43 t541x227m016ah(1)20 04052-054(2) 352 10 25 3286 125 16 220 x/7343-43 t541x227(5)016(3)(6)(1)20 n/a 352 10 25 3286 125 16 220 x/7343-43 t541x227m016ah(1)10 04052-055(2) 352 10 40 2598 125 1 6 220 x/7343-43 t541x227(5)016(3)(6)(1)10 n/a 352 10 40 2598 125 16 330 x/7343-43 t541x337m016ah(1)20 04052-056(2) 528 10 25 3286 125 16 330 x/7343-43 t541x337(5)016(3)(6)(1)20 n/a 528 10 25 3286 125 16 330 x/7343-43 t541x337m016ah(1)10 04052-057(2) 528 10 50 2324 125 16 330 x/7343-43 t541x337(5)016(3)(6)(1)10 n/a 528 10 50 2324 125 20 22 d/7343-31 t540d226m020ah(1)10 04051-037(2) 44 10 75 1732 125 20 22 d/7343-31 t540d226(5)020(3)(6)(1)10 n/a 44 10 75 1732 125 20 33 d/7343-31 t540d336m020ah(1)10 04051-038(2) 66 10 75 1732 125 20 33 d/7343-31 t540d336(5)020(3)(6)(1)10 n/a 66 10 75 1732 125 20 47 d/7343-31 t540d476m020ah(1)10 04051-039(2) 94 10 75 1732 125 20 47 d/7343-31 t540d476(5)020(3)(6)(1)10 n/a 94 10 75 1732 125 20 100 x/7343-43 t541x107m020ah(1)10 04052-058(2) 200 10 50 2324 125 20 100 x/7343-43 t541x107(5)020a(6)(1)20 n/a 200 10 30 2870 125 20 100 x/7343-43 t541x107(5)020(3)(6)(1)10 n/a 200 10 50 2324 125 vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum w/t = 20c at ?55c to 105c c rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051 dc leakage df esr maximum allowable ripple current (a) 100 khz maximum operating temp kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 10 10 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert 65 = 4 cycles +25c, 66 = 10 cycles +25c, 67 = 10 cycles ? 55c and +85c, designates surge current option. (2) to complete dla part number, insert blank = none, a = 10 cycles +25c 5c after voltage aging, b = 10 cycles ? 55c and +85c 5c after voltage aging. (3) to complete kemet part number for non-dla, insert a = n/a ,insert b = 0.1%/1,000 hours, c = 0.01%/1,000 hours, d=0.001%/1,000 hours. designates reliability level. (4) to complete kemet part number for non-dla, insert a = n/a, insert b = 0.1%/1,000 hours or c = 0.01%/1,000 hours. designates reliability level. (5) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (6) to complete kemet part number insert, h = solder plated, t = 100% tin (sn). designates termination fnish. (7) to complete kemet part number, insert 85 = 4 cycles at 25c 5c ** + improved humidity capability, 86 = 10 cycles at 25c 5c*** + improved humidity capability, 87= 10 cycles at ? 55c +0c/ ? 5c and +85c 5c*** + improved humidity capability. designates surge current option on improved humidity capability. rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051/04052 dc leakage df esr maximum allowable ripple current maximum operating temp vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum ma at 45c 100 khz c 25 6.8 c/6032-28 t540c685(5)025(3)(6)(1)10 n/a 17 10 150 1049 125 25 10 c/6032-28 t540c106(5)025(3)(6)(1)10 n/a 25 10 150 1049 125 25 15 d/7343-31 t540d156m025ah(1)20 04051-040(2) 38 10 75 1732 125 25 15 d/7343-31 t540d156(5)025(3)(6)(1)20 n/a 38 10 75 1732 125 25 15 d/7343-31 t540d156m025ah(1)10 04051-041(2) 38 10 100 1500 125 25 15 d/7343-31 t540d156(5)025(3)(6)(1)10 n/a 38 10 100 1500 125 25 22 d/7343-31 t540d226m025ah(1)10 04051-042(2) 55 10 75 1732 125 25 22 d/7343-31 t540d226(5)025(3)(6)(1)10 n/a 55 10 75 1732 125 25 33 d/7343-31 t540d336m025ah(1)10 04051-043(2) 83 10 75 1732 125 25 33 d/7343-31 t540d336(5)025(3)(6)(1)10 n/a 83 10 75 1732 125 25 68 x/7343-43 t541x686m025ah(1)10 04052-059(2) 170 10 50 2324 125 25 68 x/7343-43 t541x686(5)025(3)(6)(1)10 n/a 170 10 50 2324 125 25 100 x/7343-43 t541x107m025ah(1)10 04052-060(2) 250 10 60 2121 125 25 100 x/7343-43 t541x107(5)025(3)(6)(1)10 n/a 250 10 60 2121 125 30 22 d/7343-31 t540d226(5)030(3)(6)(1)10 n/a 66 10 75 1732 125 30 47 x/7343-43 t541x476(5)030(3)(6)(1)10 n/a 141 10 50 2324 125 30 68 x/7343-43 t541x686(5)030(3)(6)(1)10 n/a 204 10 50 2324 125 30 68 x/7343-43 t541x686(5)030(3)(6)(1)20 n/a 204 10 35 2777 125 30 100 x/7343-43 t541x107(5)030(3)(6)(1)10 n/a 300 10 70 1878 125 30 100 x/7343-43 t541x107(5)030(3)(6)(1)20 n/a 300 10 35 2777 125 35 15 d/7343-31 t540d156m035ah(1)20 04051-044(2) 53 10 75 1732 125 35 15 d/7343-31 t540d156(5)035(4)(6)(1)20 n/a 53 10 75 1732 125 35 15 d/7343-31 t540d156m035ah(1)10 04051-045(2) 53 10 100 1500 125 35 15 d/7343-31 t540d156(5)035(4)(6)(1)10 n/a 53 10 100 1500 125 35 33 x/7343-43 t541x336m035ah(1)10 04052-061(2) 116 10 60 2121 125 35 33 x/7343-43 t541x336(5)035(4)(6)(1)10 n/a 116 10 60 2121 125 35 47 x/7343-43 t541x476m035ah(1)10 04052-062(2) 165 10 60 2121 125 35 47 x/7343-43 t541x476(5)035(4)(6)(1)10 n/a 165 10 60 2121 125 50 10 d/7343-31 t540d106m050ah(1)20 04051-046(2) 50 10 100 1500 125 50 10 d/7343-31 t540d106(5)050(4)(6)(1)20 n/a 50 10 100 1500 125 50 10 d/7343-31 t540d106m050ah(1)10 04051-047(2) 50 10 125 1342 125 50 10 d/7343-31 t540d106(5)050(4)(6)(1)10 n/a 50 10 125 1342 125 50 22 x/7343-43 t541x226m050ah(1)10 04052-063(2) 110 10 75 1897 125 50 22 x/7343-43 t541x226(5)050(4)(6)(1)10 n/a 110 10 75 1897 125 50 33 x/7343-43 t541x336m050ah(1)10 04052-064(2) 165 10 75 1897 125 50 33 x/7343-43 t541x336(5)050(4)(6)(1)10 n/a 165 10 75 1897 125 6 3 4.7 d/7343-31 t540d475m063ah(1)20 04051-048(2) 30 10 100 1500 125 63 4.7 d/7343-31 t540d475(5)063(4)(6)(1)20 n/a 30 10 100 1500 125 63 4.7 d/7343-31 t540d475m063ah(1)10 04051-049(2) 30 10 120 1369 125 63 4.7 d/7343-31 t540d475(5)063(4)(6)(1)10 n/a 30 10 120 1369 125 63 10 x/7343-43 t541x106m063ah(1)10 04052-067(2) 63 10 150 1342 125 63 10 x/7343-43 t541x106(5)063(4)(6)(1)10 n/a 63 10 150 1342 125 63 10 x/7343-43 t541x106m063ah(1)20 04052-066(2) 63 10 100 1643 125 63 10 x/7343-43 t541x106(5)063(4)(6)(1)20 n/a 63 10 100 1643 125 63 10 x/7343-43 t541x106m063ah(1)30 04052-065(2) 63 10 75 1897 125 63 10 x/7343-43 t541x106(5)063(4)(6)(1)30 n/a 63 10 75 1897 125 63 15 x/7343-43 t541x156m063ah(1)10 04052-068(2) 95 10 50 2324 125 63 15 x/7343-43 t541x156(5)063(4)(6)(1)10 n/a 95 10 50 2324 125 vdc at 105c f kemet/eia (see below for part options) part number a at 25c maximum % at 25c 120 hz maximum m at 25c 100 khz maximum w/t = 20c at ?55c to 105c c rated voltage rated capacitance case code/ case size kemet part number dscc drawing number 04051 dc leakage df esr maximum allowable ripple current (a) 100 khz maximum operating temp kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 11 11 derating guidelines 50% 55% 60% 65% 70% 75% 80% 85% 90% 95% 100% ? 55 25 45 85 105 125 % rated voltage temperature (oc) rated voltage recommended application voltage v r 10 v recommended application voltage v r > 10 v recommended application voltage kocaps are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines.? while the kocap can be operated at full rated voltage, most circuit designers seek a minimum level of a ssurance in long term reliability which should be demonstrated with data. a voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. since most applications do require long term reliability, kemet recommends that designers consider a voltage derating, according the graphic above, for the maximum steady state voltage. voltage rating maximum recommended steady state voltage maximum recommended steady state voltage ?55c to 105c 1 05c to 125c 2 v v r 10 v 9 0% of v r 60% of v r ,see chart 12.5 v v r : 8 0% of v r 54% of v r ,see chart : 6 6exih:spxeki kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 12 12 ripple current/ripple voltage permissible ac ripple voltage and current are related to equivalent series resistance (esr) and the power dissipation capabilities of the device. permissible ac ripple voltage which may be applied is limited by two criteria: a . the positive peak ac voltage plus the dc bias voltage, if any, must not exceed the dc voltage rating of the capacitor. b . the negative peak ac voltage in combination with bias voltage, if any, must not exceed the allowable limits specifed for reverse voltage. the maximum power dissipation by case size can be determined using the table at right. the maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. refer to the table below for temperature compensation requirements. temperature compensation multipliers for maximum ripple current t 45c 45 c < t 85c 85c < t 125c t= environmental temperature using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. i(max) = p max/r e(max) = z p max/r i = rms ripple current (amperes) e = rms ripple voltage (volts) p max = maximum power dissipation (watts) r = esr at specifed frequency (ohms) z = impedance at specifed frequency (ohms) case code eia case code maximum power dissipation (p max) mwatts at 45c with +30c rise t 3528-12 105 m 3528-15 120 a 3216-18 112 b 3528-21 127 u 6032-15 135 l 6032-19 150 c 6032-28 165 w 7343-15 180 v 7343-20 187 d 7343-31 225 q 7343-12 170 y 7343-40 241 x 7343-43 247 h 7360-20 187 i 3216-10 95 kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 13 13 surge voltage surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. the surge voltage must not be applied for periodic charging and discharging in the course of normal operation and cannot be part of the application voltage. surge voltage capability is demonstrated by application of 1,000cycles at relevant voltage at 105oc and 125oc. the parts are charged through a 33 ohm resistor for 30 seconds and then discharged though a 33 ohm resistor for each cycle. rated voltage (v) surge voltage (v) derated voltage (v) derated surge voltage (v) C55oc to 105oc up to 125oc 2.5 3.3 1.7 2.2 6.3 8.2 4.2 5.5 10 13.0 6.7 8.7 16 20.8 10.7 13.9 20 26.0 13.4 17.4 25 32.5 16.8 21.8 35 45.5 23.5 30.5 50 65.0 33.5 43.6 6izivwi:spxeki polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. these devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. temperature permissible transient reverse voltage 25c 15% of rated voltage 55c 10% of rated voltage 85c 5% of rated voltage 105c 3% of rated voltage 125c* 1% of rated voltage *for series rated to 125c kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 14 14 table 2 C land dimensions/courtyard kemet metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) case eia w l s v1 v2 w l s v1 v2 w l s v1 v2 a 3216C18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 b 3528C21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 c 6032C25 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 d 7343C31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 l 6032-19 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 m 3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 h 7360-20 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 e1 7360C38 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 q 7343-12 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 r2 2012-12 1.05 1.83 0.15 4.82 2.50 0.93 1.50 0.22 3.72 2.00 0.83 1.12 0.38 2.86 1.74 s2 3216C12 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 t 3528C12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 u 6032C15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 v 7343C20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 w 7343C15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 x1 7343C43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 y1 7343C40 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component desity product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). 1 height of these chips may create problems in wave soldering. 2 land pattern geometry is too small for silkscreen outline. l s w w l v1 v2 grid placement courtyard kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 15 15 soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), convection, ir, or vapor phase refow techniques. preheating of these c omponents is recommended to avoid extreme thermal stress. kemet's recommended profle conditions for c onvection and ir refow refect the profle conditions of the i pc/jCstdC020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow p asses at these conditions. please note that although the x/7343C43 case size can withstand wave soldering, the tall profle (4.3 mm maximum) d ictates care in wave process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be t aken to avoid contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurs, the iron should be r emoved immediately. wiping the edges of a chip and heating the top surface is not recommended. during typical refow operations, a slight darkening of the g old-colored epoxy may be observed. this slight darkening is normal and not harmful to the product. marking permanency is not affected by this change. profle feature snpb assembly pb-free assembly preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax ) 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/seconds maximum 3c/seconds maximum liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 220c* 235c** 250c* 260c** time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/seconds maximum 6c/seconds maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum note: all temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly refow. *case size d, e, p, y, and x **case size a, b, c, h, i, k, m, r, s, t, u, v, w, and z storage all ko-cap series are shipped in moisture barrier bags (mbbs) with desiccant and humidity indicator card (hic). these parts are classifed as msl3 (moisture sensitivity level 3) per ipc/jedec j-std-020 and packaged per ipc/jedec j-std-033. msl3 specifes a foor time of 168h at 30oc maximum temperature and 60% relative humidity unused capacitors should be sealed in a mbb with fresh desiccant. calculated shelf life in sealed bag: C 12 months from bag seal date in a storage environment of < 40oc and humidity < 90% rh C 24 months from bag seal date in a storage environment of < 30oc and humidity < 70% rh? if baking is required, refer to ipc/jedec j-std-033 for bake procedure time te mp erature t smin 25 t smax t l t p maximum ramp up rate = 3oc/sec maximum ramp down rate = 6oc/sec t p t l t s 25oc to peak kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 16 16 construction t540 leadframe (- cathode) leadframe (+ anode) wire molded epoxy case molded epoxy case polarity bevel (+) weld (to attach wire) silver adhesive polarity stripe (+) detailed cross section wire tantalum ta 2 o 5 dielectric (first layer) carbon (third layer) silver paint (fourth layer) polymer (second layer) t541 - multiple anodes polymer leadframe (? cathode) leadframe (+ anode) wire molded epoxy case molded epoxy case polarity bevel (+) weld (to attach wire) silver adhesive polarity stripe (+) detailed cross section wire tantalum silver paint (fourth layer) ta 2 o 5 dielectric (first layer) carbon (third layer) polymer (second layer) kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 17 17 capacitor marking kemet multi-anode polymer polarity indicator (+) rated voltage picofarad code kemet id date code* * 620 = 20 th week of 2016 kemet multi-anode polymer polarity indicator (+) rated voltage picofarad code kemet id date code* * 620 = 20 th week of 2016 date code * 1 st digit = last number of year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2 nd and 3 rd digit = week of the year 01 = 1 st week of the year to 52 = 52 nd week of the year t540 t541 kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 18 18 tape & reel packaging information kemets molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with eia standard 481 : embossed carrier taping of surface mount components for automatic handling. this packaging system is compatible with all tape-fed automatic pick-and-place systems. table 3 C packaging quantity case code tape width (mm) 7" reel* 13" reel* kemet eia s 3216-12 8 2,500 10,000 t 3528-12 8 2,500 10,000 m 3528-15 8 2,000 8,000 u 6032-15 12 1,000 5,000 l 6032-19 12 1,000 3,000 w 7343-15 12 1,000 3,000 z 7343-17 12 1,000 3,000 v 7343-20 12 1,000 3,000 a 3216-18 8 2,000 9,000 b 3528-21 8 2,000 8,000 c 6032-28 12 500 3,000 d 7343-31 12 500 2,500 q 7343-12 12 1,000 3,000 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 e/t428p 7360-38 12 500 2,000 h 7360-20 12 1,000 2,500 * no c-spec required for 7" reel packaging. c-7280 required for 13" reel packaging. top tape thickness 0.10 mm (0.004") maximum thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0") kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 19 19 figure 1 C embossed (plastic) carrier tape dimensions po t f w cent er line s of ca vity ao bo user direction of unre eling cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 4 [10 pitches cumulative tolerance on tape 0.2 mm] 8efpii)qfswwih4pewxmg 'evvmiv8eti(mqirwmsrw metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5+0.10/?0.0 (0.059+0.004/?0.0) 1.0 (0.039) 1.750.10 (0.0690.004) 4.00.10 (0.1570.004) 2.00.05 (0.0790.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm 2.00.1 (0.0790.059) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape, with or without components, shall pass around r without damage (see figure 4). 3. if s 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481Cd, paragraph 4.3, section b). 4. b 1 dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 3). (e) see addendum in eia standard 481Cd for standards relating to more precise taping requirements. variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 , b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.50.05 (0.1380.002) 2.00.05 or 4.00.10 (0.0790.002 or 0.1570.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.50.05 (0.2170.002) 2.00.05 (0.0790.002) or 4.00.10 (0.1570.004) or 8.00.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 7.5 0.10 (0.2950.004) 4.00.10 (0.1570.004) to 12.00.10 (0.4720.004) 8.0 (0.315) 16.3 (0.642) kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 20 20 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia standards 556 and 624 . figure 2 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16 ? 200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16 ? 56 10 72 ? 200 5 typical pocke t center line typical com po nent centerline figure 3 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8 mm & 1 2 mm tap e 1.0 mm maxi mum 1.0 mm maxi mum 1 6 mm tape figure 4 C bending radius r r b en ding radius e mbo sse d carrier p unc hed ca rrier kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 21 21 figure 5 C reel dimensions a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm minimum) if present, tape slot in core for t ap e start: 2.5 mm minimum width x 10.0 mm minimum depth w3 (includes flange distortion at outer edge) w2 (m ea sured at hu b) w1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n 8efpii6iip(mqirwmsrw metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum 8 mm 1780.20 (7.0080.008) or 3300.20 (13.0000.008) 1.5 (0.059) 13.0+0.5/?0.2 (0.521+0.02/?0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 8 mm 50 (1.969) 8.4+1.5/?0.0 (0.331+0.059/?0.0) 12.4+2.0/?0.0 (0.488+0.078/?0.0) 16.4+2.0/?0.0 (0.646+0.078/?0.0) kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 22 22 figure 6 C tape leader & trailer dimensions trailer 16 0 mm minimum carrier t ape end start rou nd sp rock et holes el ongated spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm minimum leader 400 mm minimum figure 7 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s) kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2077_t540-541 ? 11/29/2016 23 23 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet is a registered trademark of kemet electronics corporation. kemet organic capacitor (ko-cap ? ) C high reliability t540/t541 cots polymer electrolytic for high reliability applications, 2.5 C 63 vdc

▲Up To Search▲

Price & Availability of T541D157M10AH6510

	To Download T541D157M10AH6510 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .